5% Silver Brazing Alloy Rod
Alloy used to join copper together as well as copper to brass. Available individually. Please contact us for more information about this product.
Home
Home
Subcategories
There are 58 products.
Active filters
45% Silver Brazing Alloy Rod
High-strength silver solder brazing alloy rod up to 45% silver content. Easy flow, high quality and high strength brazing temperature of approximately 700ºC. Can be used for both ferrous and non-ferrous metals such as steel, copper and brass. Available individually. Please contact us for more information about this product.
Bossweld Oxygen/Acetylene Twin Hose Assembly - 5 Metres
Fittings are fitted and crimped Conforms to AS 4267 Torch end offset to fit torch handle Available in 5, 10 and 15mt lengths For use with Oxygen and Acetylene gasesAvailable in 5, 10 or 15 metre lengths.
Bossweld Oxygen/Acetylene Twin Hose Assembly - 10 Metres
Fittings are fitted and crimped Conforms to AS 4267 Torch end offset to fit torch handle Available in 5, 10 and 15mt lengths For use with Oxygen and Acetylene gasesAvailable in 5, 10 or 15 metre lengths.
Bossweld Oxygen/Acetylene Twin Hose Assembly - 15 Metres
Fittings are fitted and crimped Conforms to AS 4267 Torch end offset to fit torch handle Available in 5, 10 and 15mt lengths For use with Oxygen and Acetylene gasesAvailable in 5, 10 or 15 metre lengths.
R215 Y Connector Left Hand (Fuel)
Used for splitting gas supply from one line into two. All threads are 5/8 -18UNFUse with Oxy/Acetylene Left and right hand threads Made from brass Silver soldered joints
R121 Y Connector Right Hand (Oxygen)
Used for splitting gas supply from one line into two. All threads are 5/8 -18UNFUse with Oxy/LPG Left and right hand threads Made from brass Silver soldered joints
WB34 Joiner Right Hand 5/8 (Oxygen)
Crimp or screw on fittings, left and right handed, for use with gas equipment.
WB35 Joiner Left Hand 5/8 (Fuel)
Crimp or screw on fittings, left and right handed, for use with gas equipment.
Bossweld Argon Dual Stage Regulator Side Entry
Bossweld Dual Stage Argon Regulators are designed for use with TIG and MIG welding processes. Advantage of a dual stage regulator is its ability to deliver a constant pressure, even with a decrease in inlet pressure (cylinder content), giving the welder an accurate and precise flow control. No soldered joints Safety relief valve Tough perspex lens Easy...