Single Hose Inert
Female RH hose, manufactured to AS 1335, including strength tests for end fittings. Length: 3 metre coil 5mm
Gas & Cutting Equipment
Gas & Cutting Equipment
Subcategories
There are 12 products.
Active filters
LP112 Hose Connector Right Hand (Oxygen)
Screw type connector suitable for 5 mm inside diameter hose.
Bossweld Oxygen/Acetylene Twin Hose Assembly - 5 Metres
Fittings are fitted and crimped Conforms to AS 4267 Torch end offset to fit torch handle Available in 5, 10 and 15mt lengths For use with Oxygen and Acetylene gasesAvailable in 5, 10 or 15 metre lengths.
R215 Y Connector Left Hand (Fuel)
Used for splitting gas supply from one line into two. All threads are 5/8 -18UNFUse with Oxy/Acetylene Left and right hand threads Made from brass Silver soldered joints
Bossweld Oxygen/Acetylene Twin Hose Assembly - 10 Metres
Fittings are fitted and crimped Conforms to AS 4267 Torch end offset to fit torch handle Available in 5, 10 and 15mt lengths For use with Oxygen and Acetylene gasesAvailable in 5, 10 or 15 metre lengths.
R121 Y Connector Right Hand (Oxygen)
Used for splitting gas supply from one line into two. All threads are 5/8 -18UNFUse with Oxy/LPG Left and right hand threads Made from brass Silver soldered joints
Bossweld Oxygen/Acetylene Twin Hose Assembly - 15 Metres
Fittings are fitted and crimped Conforms to AS 4267 Torch end offset to fit torch handle Available in 5, 10 and 15mt lengths For use with Oxygen and Acetylene gasesAvailable in 5, 10 or 15 metre lengths.
WB34 Joiner Right Hand 5/8 (Oxygen)
Crimp or screw on fittings, left and right handed, for use with gas equipment.
WB35 Joiner Left Hand 5/8 (Fuel)
Crimp or screw on fittings, left and right handed, for use with gas equipment.